NEWS
NEWS
What are the precautions for safe operation of dredge machine
Time：
Sep 02,2020
Author：
Source：
What are the precautions for safe operation of dredge machine
1. During use, it is strictly forbidden to pass the flexible shaft with water through the machine body, so as to prevent dirty water from flowing into the motor, causing the motor to get wet and burnt, or the machine parts to be corroded by dirty water, causing damage to the machine.
2. When manipulating the power switch, it is strictly forbidden to change from forward to reverse suddenly. You must stop and change direction after stopping, otherwise the switch will be easily damaged.
3. When using a Φ16mm flexible shaft to dredge the pipeline, the part of the flexible shaft used must be taken out of the flexible shaft basket and separated from the flexible shaft in the basket. During operation, it is strictly forbidden to have half of the flexible shaft in the fuselage and half in the basket.
What are the precautions for the safe operation of the dredge machine?
4. Safety protection measures must be taken when using Dali brand pipe dredging machine, such as leakage protector and safety isolation transformer. Otherwise, users must wear insulating gloves, wear insulating shoes or stand on insulating mats.
5. When operating in a special environment (such as boilers, inside pipelines, and humid areas), someone should monitor it outside, and it is strictly forbidden to operate the machine in water.
6. When using Φ16mm flexible shaft and thick flexible shaft to dredge the pipeline, the automatic head can only be used when the soft shaft moves to the blocked place. Moreover, the hand should lightly press the clutch handle. When the flexible shaft moves to the blocked place, immediately lift the automatic pin. At this time, press the clutch handle firmly with the hand, so that the flexible shaft can dredge the pipeline strongly to achieve a better dredging effect. And to avoid damage to the flexible shaft, when each flexible shaft joint passes through the automatic head, be sure to release the clutch handle to lift the automatic pin, send the flexible shaft joint by hand, and then drop the automatic pin before continuing to advance and retreat automatically, so as to avoid automatic The pin is stuck on the flexible shaft and will not operate properly.
News Updates
—
Apr 07,2023